Aruba AP-615 (RW) Access Point Wifi 6E
HPE Aruba Networking 610 Series Access Points are designed to take advantage of the 6 GHz band using two radios that can deliver comprehensive tri-band coverage in a multi-AP environment and better meet the growing demands of Wi-Fi due to increased use of video, growth in client and IoT devices, and expanded use of cloud.
More Capacity and Wider Channels with Wi-Fi 6E
- HPE Aruba Networking 610 Series Campus Access Points with dual radios deliver up to a maximum combined 3.6 Gbps data rate for higher throughput and faster speeds.
- With up to seven 160 MHz channels, the APs increase performance for low-latency, bandwidth-hungry applications.
- The Designed for Low Power Indoor environments (LPI).
Cost-effective and Compact 6 GHz Coverage
- HPE Aruba Networking 610 Series Campus Access Points equip enterprises with 6 GHz coverage providing up to 1200 MHz additional capacity at an attractive price point.
- Software-programable radios can be configured to cover any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, 6 GHz.
- It offers low power (802.3af Class 3) and compact form factor for ease of deployment.
- Client and RF optimization to match clients with the best available access point and reduce coverage gaps.
- Zero Touch Provisioning provides ease of implementation in branch offices and remote sites, without on-site technical expertise.
Extends capabilities of Wi-Fi 6 (802.11ax)
- HPE Aruba Networking 610 Series Campus Access Points are based on the 802.11ax standard so multi-user efficiency and security features are applied to Wi-Fi 6E.
- Wi-Fi 6E extends support for Wi-Fi 6 features such as OFDMA, bidirectional MU-MIMO, and Target Wait Time for better multi-user performance and improved efficiency.
- Unique HPE Aruba Networking capabilities include ClientMatch, Advanced Cellular Coexistence, and Intelligent Power Monitoring to customize user experience and energy use.
Indoor location-aware access points
- HPE Aruba Networking 610 Series Campus Access Points include built-in GPS receivers and fine time measurement to automatically and accurately locate themselves.
- The access point supports Open Locate, an emerging standard that allows APs to share their location over the air and through cloud-based APIs.
HPE Aruba Networking AP‑615‑RW Dual Radio Tri Band 2×2 Wi‑Fi 6E Int Antennas Campus AP
CertificationsUL2043 plenum rating;
Bluetooth SIG;
Ethernet Alliance (PoE, PD device, Class 4);
Wi-Fi Alliance (WFA): Wi-Fi CERTIFIED a, b, g, n, ac, Wi-Fi CERTIFIED 6E (ax, 6 GHz), WPA, WPA2 and WPA3 Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE), WMM, WMM-PS, W-Fi Agile Multiband, Wi-Fi CERTIFIED Location™
Input voltageThe AP supports direct DC power and Power over Ethernet (PoE) on port E0
RegulatoryAP-615 (all models): APIN0615
FCC/ISED
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
UL/IEC/EN 62368-1
EN 60601-1-1, EN60601-1-2
Wi-Fi antennaAP-615: Integrated downtilt omni-directional antennas for 2×2 MIMO with peak antenna gain of 2.8 dBi in 2.4 GHz, 4.5 dBi in 5 GHz and 4.5 dBi in 6 GHz.
Connectivity, standardWi-Fi 6E (802.11ax)
PortsE0: Ethernet wired network ports (RJ-45)
DC power interface: 12 Vdc (nominal, +/- 5%)
USB 2.0 host interface (Type A connector)
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
Visual indicators (four multi-color LEDs)
Reset button: factory reset, LED mode control (normal/off)
Serial console interface (proprietary, micro-B USB physical jack)
Kensington security slot
MountingA mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately); see the 610 Series ordering guide for details.
Power consumptionMaximum (worst-case) power consumption:
DC powered:12.5W/18.2W
POE powered: 14.7W/20.9W
Radio coverageIndoor, dual-radio/tri-band 2.4 GHz, 5 GHz and 6 GHz (dual concurrent) 802.11ax 2×2 MIMO
WarrantyLimited lifetime warranty. See the warranty duration guide.
Detailed product descriptionHPE Aruba Networking 610 Series Access Points are designed to take advantage of the 6 GHz band using two radios that can deliver comprehensive tri-band coverage in a multi-AP environment and better meet the growing demands of Wi-Fi due to increased use of video, growth in client and IoT devices, and expanded use of cloud.
DifferentiatorAvailable everywhere except US, Israel, Japan and Egypt
Add Mount Kits
Weight0.72 kg (1.59 lb)
Dimensions5.1 x 20.1 x 18.3 x cm (2 x 7.9 x 7.2 in)
Reviews
There are no reviews yet.